Zephyr 1
€599.90*
- 1 person
- 40 x 12 cm
- 1.230 g
The Zephyr 1 is a 1-person hybrid tent with a spacious vestibule – ideal for solo trips. Thanks to its external poles, it can be pitched and taken down particularly quickly. Two aluminum hub connectors integrated into the carbon pole frame provide excellent wind stability. An additional ridge pole offers reliable rain protection for the inner tent. Integrated fabric sleeves ...
Product sold out
This product is currently sold out.
Product number:
231091
Accessory products
Tip
New
Footprint Set – Zephyr 1
The footprint offers additional protection for the tent floor against wear and tear. Tailored to fit the Zephyr 1 perfectly, it is securely attached to the tent poles using sturdy metal eyelets. The two-piece set includes a footprint to cover the inner tent floor and a tub-shaped mat for one half of the vestibule. This keeps backpacks, shoes and other equipment dry and clean, even in bad weather.
€49.90*
Product information "Zephyr 1"
The Zephyr 1 is a 1-person hybrid tent with a spacious vestibule – ideal for solo trips. Thanks to its external poles, it can be pitched and taken down particularly quickly. Two aluminum hub connectors integrated into the carbon pole frame provide excellent wind stability. An additional ridge pole offers reliable rain protection for the inner tent. Integrated fabric sleeves at each end of the ridge pole allow trekking poles to be inserted, further enhancing stability in challenging weather conditions. With its lightweight and compact pack size, the Zephyr 1 is perfectly suited for backpacking and bikepacking. Inside, it offers a comfortable sitting height and, thanks to its asymmetrical design, sufficient space to store a backpack or gear. The inner tent is largely made of mosquito mesh, ensuring excellent ventilation while keeping insects out. Although designed as a one-person tent, it can accommodate two people in an emergency. The durable 39 cm carbon pole segments ensure maximum strength with minimal weight. Combined with tear-resistant, long-lasting materials, the Zephyr 1 is a reliable hike & bike tent built to withstand demanding conditions.
The Zephyr 1 will be available from mid-April 2026.
Safety Instructions
Allow the tent and floor to air dry completely before storing to prevent odors and mildew from forming. Always push the pole segments in as far as they will go to prevent damage to the poles. Please note that the packaging is not a toy and does not belong in the hands of babies and small children.
User Manuals
| Color: | Thyme |
|---|---|
| PFC free: | yes |
| PVC free: | yes |
| Packing size: | 40 x 12 cm |
| Persons: | 1 person |
| Setup: | Fly First |
| Special feature: | Bike Packing Optimized Bag |
| Trail weight: | 1.050 g |
| Weight: | 1,23 kg |
Product highlights
Quick setup
Pitching the Zephyr is fast and easy by connecting the pole frame and the flysheet. The inner tent is already attached to the flysheet. In case of setting the tent in the rain, the inner tent will be safe from getting wet. If the ground is too hard, you don't necessarily need to fix the tent with pegs. The construction is free-standing, only the vestibule has to be tensioned.
Trekking pole holders
There are fabric sleeves at both ends of the ridge pole for securing trekking poles. This reinforces the tent's structure and improves its stability in windy conditions – ideal for challenging weather.
Asymmetrical inner tent
The asymmetrical design of the inner tent has been a defining feature of our tents since the beginning and sets our Outpost and Tempest tunnel tents apart. With the Zephyr 1, we are now presenting our first hybrid tent with an asymmetrical inner tent design. The key advantage is the extra storage space, which allows you to keep your equipment in a safe and organized way.
Carbon frame
Our Carbon frame tents feature ultra-short 39 cm pole segments, delivering an impressively compact pack size. Combined with their lightweight design, they’re built for bike and hike adventures where every gram matters.
Zero-G Line with Carbon pole frame
If you’re looking for a bike & hike tent that combines ultralight performance, exceptional craftsmanship, and real comfort the Zero-G Line with Carbon pole frame is built for you. These tents are designed for adventurers who move fast and travel light, without compromising on reliability. A newly developed carbon pole system, made entirely from carbon – including the joints – reduces weight while eliminating stress points caused by mixed materials. Tested in heat, rain, cold, and snow, the carbon pole frame has proven its reliability in every environment.
Features
- Increased UV protection due to the siliconized outer side of the flysheet
- High-quality durable SIL/PU coating on the bottom
- Factory taped seams on the inner tent floor
- Flysheet fabric with high tearing strength of 7kg
- High quality Dur Aluminium V-Pegs
- YKK zippers specially developed for tents
- Processing of all fabrics with high stitch density
- Free from flame retardants
- Free from PFAS
Technical details
| Inner tent: | Nylon NoSeeUm Mesh, breathable |
|---|---|
| Flysheet: | Ripstop Nylon 10D, SIL / SIL, 3.000 mm water column, 7 kg tearing strength |
| Poles: | Carbon, Bolt tip |
| Floor: | Nylon 25D , SIL / PU coated, 5.000 mm w.c., taped seams |
Customer reviews
Login
Frequently asked questions
The basic things are always the same: never store the tent packed damp for long periods. Regularly remove sand and / or dirt from the tent, as sand and / or dirt can act like sandpaper when packing. Keep the zips moving. Also remove dirt from the zips and spray them sparingly with silicone spray from time to time. Never leave the tent in direct sunlight for unnecessarily long periods. This precaution will increase the tent's lifetime in the long term. More details and care tips can be found in the user instructions.
Due to the silicone coating, seam tape cannot be applied to tents from the Zero-G Line. However, the cotton-coated polyester thread used swells when exposed to moisture and seals the seams. However, we recommend applying seam sealer to the outside of the flysheet before first use. The seams on the outer tent and inner tent floor of the "Bella" and "Donna" tents are already taped and should not be additionally treated with seam sealer. The seams of the Travel Line tents are factory-sealed with seam tape. At stress points or where elastic bands or tapes have been inserted into the seam, the seams may leak. In this case, please apply seam sealer to the outside of the dry fabric and let it dry for at least 24 hours.
Due to the silicone coating, seam tape cannot be applied to tents in the Zero-G Line. However, the cotton-coated polyester thread used swells when exposed to moisture and seals the seams. However, we recommend applying seam sealer to the outside seams of the flysheet before first use. The seams on the outer tent and inner tent floor of the "Bella" and "Donna" tents are already taped and should not be additionally treated with seam sealer. The seams of the Travel Line tents are factory-sealed with seam tape. At stress points or where elastic or tape has been inserted into the seam, the seams may leak. In this case, please apply seam sealer to the dry fabric from the outside and let it dry for at least 24 hours.
Hard cleaning agents are generally not suitable for lightweight tents. Use water with a little washing-up liquid and try to wipe off the dirt with a soft sponge. If this does not work, you can try other cleaning agents on a small area or on the packing bag first. Never wash a tent in a washing machine.
Basically, the type of coating is decisive. For polyester and nylon with a PU coating, you should only use Seam Grip or similar suitable products. You can also use Seal Net, as silicone adhesives adhere to both materials.Only Seal Net or similar should be used for polyester and nylon with a silicone coating, as Seam Grip only lasts for a very short time on these materials, i.e. it behaves in a similar way to the skin after a severe sunburn.
If only single segments are broken, these can be replaced. Our poles are fitted with a so-called bolt tip, the colored end piece of a pole. The bolt tip is screwed or inserted and can be pulled out / screwed out. The shock cord is attached to the bolt tip. Unfold the pole completely so that the tension of the shock cord is released. Now undo the knot of the shock cord at the end piece and work your way towards the defective segment using the glass bead chain principle. We have provided video instructions on our spare parts service page.
There are sometimes climatic conditions where ventilation reaches its limits. For example, when there are large temperature differences and the temperature drops below 15 degrees at night, humid air when it rains, morning fog, etc. What many people don't realize is that the floor also releases a lot of moisture. This reveals a disadvantage of large vestibules, which cover a very large floor area and thus collect the ground moisture. A groundsheet provides a remedy in this case and prevents ground moisture from accumulating inside the tent.
It may be that the zip can no longer be closed properly after prolonged use, especially if the zip has often got stuck in the fabric. In this case, the zip has stretched a little. You can restore the closing force by applying light and even pressure with two identical clips on the sides of the zip slider. But be careful! If you compress the zip slider too much, it will be too stiff. It is therefore better to apply light pressure more often and check each time whether the zip closes properly. A zip should be maintained regularly. This means removing dirt and dust from the coil and applying a care product from time to time, for example ‘Mc Nett ZIP tech’. If you are travelling, silicone spray or candle wax can also help.
It is often condensation that causes the floor and therefore the underside of the sleeping mat to become damp. You can determine whether the floor is leaking with a simple test. Take a bucket and place the tent floor to be tested over it. Now secure the material to the bucket with a cord or rubber band. The floor material should form a hollow of approx. 10 cm. Fill the hollow with water and leave it to stand for a while. The water should be slightly warmer than room temperature so that condensation does not distort the result. After an hour, carefully release the safety catch and lift the base. If the base is leaking, it should be clearly visible on the underside.
A tear in the flysheet can easily be sealed with a patch. Here is a brief guide: We recommend sticking a patch on from the inside. It does not have to be made of a waterproof fabric, as the patch is sealed by the seam sealer and the colour does not matter. Spread out the tent so that the outside is on top. Fix the tear from the outside with a paper sticker. Now turn the fixed fabric inside out. Apply a generous amount of seam sealer to the patch and stick it to the fixed area. Make sure that the patch extends beyond the edge of the seam sealant. Then place a plastic bag over it and weigh it down with books. After 2 hours, remove the books and the plastic bag and carefully peel off the sticker. Check the stain and apply a little more seam sealer if necessary. Then allow the stain to dry for 24 hours. We recommend using SilNet from McNett, a permanently elastic silicone seam sealer.
The less expensive PU coating has the disadvantage that it hardens over the years, regardless of whether the tent is used or just lying in a cupboard. This means that the waterproofness deteriorates. In order to ensure rainproofness after several years, a much higher water column must be achieved initially with a PU-coated material. Silicone-coated materials, on the other hand, remain almost constant over a long period of time. For this reason, an initial impermeability of 2,000 mm is absolutely sufficient. According to DIN, a tent is rainproof with a water column of 1,200 mm on the outer tent.
If the tent is standing in water and you kneel down, the pressure in certain places is so high that even a water column of 15,000 mm is not enough to prevent water from penetrating. Modern tents, whether used or brand new, are not designed to stand in water. The only solution is therefore to use the tent floor and, if possible, find a place that will not be flooded overnight.
There is a fundamental difference between waterproofing and coating. The PU or silicone coating ensures impermeability. The impregnation has a beading effect and serves to support the coating. Coatings deteriorate through ageing and use (e.g. abrasion). More so with PU than with silicone. We are not aware that it is possible to apply or renew a coating retrospectively. Various manufacturers such as Gear Aid, Grangers or Nikwax offer suitable products for impregnation. As mentioned, these are only intended to be supportive and not permanent.
The so-called repair tube is used for first aid repairs if a tent pole breaks while travelling. It has a slightly larger diameter than the tent poles and can therefore be easily slid over the damaged area. The easiest way to attach the repair sleeve is with duct tape.
The mosquito gauze used in our tents is so-called NoSeeUm mesh with a mesh density of approx. 360 / square inch. This means that our gauze has almost twice as many meshes as recommended by the WHO and therefore keeps out even the smallest mosquitoes.
The mesh size of a mosquito net is calculated worldwide in MESH, i.e. mesh per square inch.
Please contact your retailer within the warranty period of 2 years or contact us directly after the warranty period has expired. In most cases, we have all spare parts available for immediate delivery. Your retailer can order the accessories from us. Our customers appreciate the excellent service provided by Wechsel. No matter how well you look after your equipment, damage can always occur. In any case, we are there to help and advise you so that you can either repair your equipment yourself or our service department can repair your product professionally and cost-effectively.
Wechsel offers a 2-year guarantee on all products from the date of purchase. This warranty covers defects in material, production and workmanship. The warranty does not cover damage caused by accidents, improper use, personal negligence or normal wear and tear of the product. We will be happy to repair any damage beyond the warranty for a small fee. Please contact your retailer or our service department directly. If you send a tent in for repair, please contact us first. If you send your tent in for repair, it must be free of loose dirt. Dirt particles not only damage the material, but also our machines, so we can only process clean tents. Please always enclose a short letter with your name, the reason for sending in the tent and your telephone number. We will contact you immediately if we have any questions regarding the processing of your repair.
The specifications for the terms "total weight" and "trail weight" are based on the ASTM F 1934-98 standard.
The total weight includes the complete package, including the repair kit, seam sealer, tags, and setup instructions.
The minimum weight, on the other hand, always refers to the weight of the inner tent and fly sheet as well as the tent poles, but not to other included items such as pegs, guy lines, stuff sack, etc.
Due to the different setup options, Wechsel tents can sometimes be pitched using only the fly sheet, poles, or footprint.
For non-free-standing tents, the minimum number of pegs is included in the trail weight.
For most users, the actual weight in use will fall somewhere between these specified values.